If you're like most people, you probably water your lawn the same way your parents or grandparents did—by hand, with a hose, and without giving it much thought. But there's a better way. With smart irrigation, you can save water and money while still having a beautiful lawn. Here are 7 ways to do it.
1. Use A Rain Sensor
A rain sensor is a device that measures rainfall and then automatically turns off your irrigation system when enough rain has fallen. That way, you won't waste water by watering your lawn when it's already wet.
Three Types of Rain Sensors
1) Manual
This is a simple device that notifies you when it rains but you have to go out and manually turn off the irrigation when it starts raining.
2) Automatic
This type is connected to your irrigation system and will automatically turn it off when it starts raining.
3) Smart
This type not only measures rainfall but also connects to your Wi-Fi network so that it can send data to your phone or computer. This allows you to see how much rain has fallen, adjust your irrigation schedule, and more.
2. Get A Soil Moisture Sensor
Sensors that assess the amount of moisture in the soil then change the timing of irrigation accordingly are referred to as "soil moisture sensors." This will result in your grass receiving water only when it is actually required, which will save both water and money.
3. Choose The Right Sprinkler Heads
There are many different types of sprinkler heads available, so it's important to choose the ones that best meet your needs. Some factors to consider include the type of lawn you have, the size, and the climate in which you live.
Three Types Of Sprinkler Heads
1) Rotor - use a spinning disk to throw water high into the air, which then rains down on your lawn.
2) Spray - use a number of small nozzles to shoot water in all directions, which is perfect for covering large areas of lawns.
3) Drip - deliver water directly to the soil, which is perfect for watering plants or gardens.
For a complete guide of what would be the right sprinkler for you, you can get in touch with an expert like Heroes Lawn Care New Braunfels, TX. They offer a wide range of services that help with proper irrigation.
4. Use An Irrigation Controller
An irrigation controller is a device that allows you to automate your irrigation system. With an irrigation controller, you can set specific times for your system to turn on and off, as well as customize the amount of water each zone receives. That way, you can be sure your lawn is getting just the right amount of water—no more, no less.
5. Check For Leaks Regularly
Leaks in your irrigation system can waste a lot of water and lead to higher water bills. To prevent leaks, check all of your hoses and fittings regularly for signs of wear and tear. If you find a leak, repair it immediately.
6. Know When To Water
The best time to water your lawn is in the early morning hours before the sun is up high in the sky. That way, evaporation is minimized and it will have time to dry out before nightfall. Watering in the evening can lead to fungal growth because the grass stays wet overnight.
7. Adjust For Wind Speed And Direction
When watering your lawn, be sure to take into account wind speed and direction. If you don't, you could end up wasting water by watering areas that are already wet or by having water blow away from where you intended it to go. By taking wind into account, you can be sure that your lawn is being properly watered.
Conclusion
By following these seven tips, you can save water and money while still having a beautiful lawn. With smart irrigation, everyone wins!